Introducing the HollowBody Helper Kit: a comprehensive solution designed to simplify the intricate process of wiring hollow and semi-hollow body guitars. This kit includes specialized components to facilitate the efficient installation of pots, switches, and jacks within the guitar’s body, all housed in a durable hard case for organized storage and portability.

Kit Components:

• 8 Hose Locks: Small, cylindrical devices used to secure the flexible tubing during installation. To use, grasp the lock with your fingers, pull the tubing behind it, and slide the lock into place to hold the tubing securely.
• 10 Double-Sided Magnetic Barbs: Featuring embedded magnets, these barbs come in two sizes—5 short and 5 long—to assist in guiding components through the guitar’s internal cavities.
• 5 Single Short Barbs with Magnetic Ends: Designed for tasks requiring a single barb with a magnetic end, these components aid in precise placement during installation.
• 2 No-Catch Bushing Rings: Utilize these rings when you want to prevent the silicone tubing from catching on components like jacks during installation.
• 2 Non-Magnetic Ends for Jack Installation: Specifically designed to assist in pulling jacks into place without magnetic interference.
• 5 Pieces of Silicone Tubing: Flexible tubes that facilitate the routing of wires and components through the guitar body, ensuring a smooth installation process.
• Durable Hard Case: All components are neatly organized within a sturdy hard case, ensuring easy access and portability.

How to Use the HollowBody Helper Kit:

1. Preparation:
   • Ensure the guitar is stable on a workbench.
   • Remove strings and any obstructions to access the internal cavities.
2. Component Removal:
   • Carefully extract existing pots, switches, and jacks through the F-hole or pickup cavities.
   • Disconnect and remove old wiring as needed.
3. Installing New Components:
   • For Pots and Switches:
     • Insert a magnetic barb into a piece of silicone tubing.
     • Feed the tubing through the respective mounting hole from the exterior into the guitar cavity.
     • Inside the cavity, use a tool like a screwdriver to attract and guide the magnetic barb through the F-hole or pickup cavity.
     • Once accessible, remove the magnetic barb and attach the pot or switch to the tubing.
     • Gently pull the tubing back, guiding the component into its mounting hole.
     • Secure the component in place and detach the tubing.
   • For Jacks:
     • Insert a magnetic barb into a piece of silicone tubing.
     • Feed the tubing through the jack mounting hole into the guitar cavity.
     • Inside the cavity, guide the tubing to an accessible area using a tool to attract the magnetic barb.
     • Remove the magnetic barb, slide the lock washer and jack onto the tubing, and reattach a magnetic barb with a double-sided feature.
     • Use hose locks to secure the assembly.
     • Gently pull the tubing to position the jack into its mounting hole.
     • Once the jack is properly seated, lock it down before carefully removing the tubing.

Additional Tips:

• Hose Locks: These small, cylindrical devices are used to secure the flexible tubing during installation. To use, grasp the lock with your fingers, pull the tubing behind it, and slide the lock into place to hold the tubing securely.
• No-Catch Bushing Rings: Use these rings to prevent the silicone tubing from catching on components like jacks during installation.
• Non-Magnetic Ends: These are specifically designed to assist in pulling jacks into place without magnetic interference.

By following these steps and utilizing the components of the HollowBody Helper Kit, you can streamline the wiring process, ensuring a secure and efficient installation within hollow and semi-hollow body guitars.

Note: This kit is compatible with most hollow and semi-hollow body guitars. Please ensure that the components you intend to install are suitable for use with the magnetic guides and tubing provided.

The hard case design is based on the “Parametric Rugged Box” by TheSameNameTwice, available at https://www.thingiverse.com/thing:4757317. This design is licensed under the Creative Commons – Attribution license.